Documentation

Everything you need to master HelioCad. Browse by topic — each guide walks you through the workflow end to end.

Getting started

From sign-up to your first saved part in under ten minutes.

  • Sign up — install nothing
  • Workspace tour
  • Your first model
  • Saving and autosave
Read the guide

AI chat and the orb

How to talk to HelioCad and get exactly the geometry you want.

  • Writing effective prompts
  • Voice input
  • Image-to-model
  • Iterative refinement
  • Reading and editing the generated code
Read the guide

Sketching

The 2D constraint solver that drives every parametric part.

  • Geometry primitives
  • Geometric and dimensional constraints
  • Sketch on a face
  • Constraint inference and snapping
Read the guide

3D modeling

Industry-standard parametric operations with a full, editable step history.

  • Extrude, revolve, sweep, loft
  • Fillet, chamfer, shell, draft
  • Boolean operations
  • Linear and circular patterns
  • Direct push-pull editing
Read the guide

Viewport, materials & presentation

Display styles, studio lighting, physically based materials, focus mode, presentation mode, exploded views, and the Render Studio.

  • Display styles
  • Studio lighting and PBR materials
  • Presentation mode and exploded view
  • Focus mode
  • Render Studio: Live Realism to final still
Read the guide

Precision editing

Snapped drags, exact values, 3D snapping, in-place step edits, typed transforms, and smart measurement.

  • The drag engine and modifiers
  • 3D snapping and the HUD
  • Editing steps in place
  • Parameters and typed transforms
  • Smart measure
Read the guide

Assemblies

Bringing parts together with mates, motion, and interference checks.

  • Mate constraints
  • Interference detection
  • Bill of materials
  • Exploded views
Read the guide

Simulation

Built-in FEA for static, thermal, and modal analysis on any solid.

  • Static FEA
  • Thermal analysis
  • Modal frequencies
  • Boundary conditions
  • Mesh density
  • Reading von Mises results
Read the guide

CAM and manufacturing

Toolpaths, post-processors, and verified G-code.

  • Toolpath strategies
  • Tool library
  • Feeds and speeds
  • Post-processors
  • Simulating the cut
  • G-code export
Read the guide

Import and export

Round-trip your files in every format that matters.

  • Supported formats
  • Round-tripping STEP
  • DXF for 2D drawings
  • STL for 3D printing
  • Troubleshooting bad geometry
Read the guide

HelioCAD Bridge

Connect your laser hardware — what connects directly over USB, and when the free Bridge app is needed.

  • Who connects how
  • Installing the Bridge
  • Pairing and connecting
Read the guide

Electronics: schematic to board

Draw a circuit, check it, lay out and route the PCB, export fabrication files, and put the board in its case — all in one project.

  • Two workspaces, six steps
  • Drawing the schematic
  • Laying out and routing the board
  • Make it: fabrication files, BOM and sourcing
  • Review, datasheets and firmware
  • The board in its case
Read the guide

3D printing

Pick a printer, check the fit and the print, choose which side faces up, and hand the part to your slicer.

  • Pick a printer
  • Check the print
  • Hand it to your slicer
Read the guide

Reverse engineering

Turn a scan, a mesh, or a single photo into a solid you can edit — and see exactly how far it is from the original.

  • Start from a scan, a mesh, or a photo
  • Convert to solid
  • Check the result
Read the guide

Can't find an answer?

Our team is hands-on with every support request. We'll get back to you within a business day.

Contact support